Cut to the Chase (Part 2)

Jewelry Tweezer And Diamonds

By John Carter, CGA, Jack Lewis Jewelers

Buying finished jewelry is so different than buying loose diamonds, mainly because our diamond buying is a year-long process. We are constantly searching for diamonds, whether it be something specific that a client has asked to see or just something that we need to meet our day-to-day inventory needs.

Because of this never-ending search for perfect diamonds, our ability to spot the good ones remains pretty sharp. I’ve always said that a really well-cut diamond has a sort of “it factor,” meaning after you’ve seen enough of them, you just know the special ones with a glance. When it takes your breath away—right away—that’s the one.

When I closed Part I of this blog, I promised you that we would discuss exactly what goes into making a diamond an AGS Ideal® cut. How do you tell the difference? And is it worth the extra money? I stressed out so much about living up to my promise that I reached out to my good friends at American Gem Society Laboratories to make sure I kept it all straight. So here we go:

What exactly is “cut” as it relates to diamonds? The American Gem Society (AGS) and AGS Laboratories say, “The cut of a diamond refers to how well the facets of a diamond interact with light, the proportions of the diamond, and the overall finish of the diamond.” (Source: americangemsociety.org/diamond-cut)

Facets, light interaction, proportions, and finish may seem like small things, but their influence on the beauty of a diamond is enormous. AGS makes it really easy to understand with their 0 to 10 grading system, with zero (0) being the highest cut grade (ideal) a diamond can receive and 10 being the lowest. However, this apparent simplicity is deceptive because it requires very careful analysis of all things that make up that diamond.

It used to be that diamonds were “cut graded” primarily by their proportions, but AGS revolutionized diamond grading in 2005 when they released their long-awaited Light Performance Cut Grading System.

This method uses patented software technology to measure the attributes that are most important to the beauty of your diamond: Brightness, Fire (spectral color), and Contrast. The combined impact of these factors is what breathes life into your diamond and makes it sparkle!  In other words, they are the secret ingredients of the “it factor” that I mentioned above.

ags-scale

The AGS Grading Scale, based on a 0 to 10 scale, makes grades easier to understand;
0 means the cut grade is the best it can be.

Because every facet is considered, every cutting mistake and design flaw can impact the final Cut Grade. Consequently, the AGS Performance Cut Grade system is the most technologically advanced and scientifically rigorous system in the world and represents the highest standards in cut grading.

These ranges make it easier to understand, but I’ve seen more than my share of clients get caught up in these numbers, and they forget to ask themselves one thing: how does the diamond actually look? Is it bright and sparkly with a lot of life? Yes? Then don’t let one number encourage you to cast a pretty diamond onto the scrap pile.

What’s really cool from a gemologist’s point of view is that the same technology used to compute the Cut Grade also produces a color-coded image of the diamond which allows you to understand its light performance.

aset-pic-1

The above is called an ASET image. ASET stands for Angular Spectrum Evaluation Tool. (There will be a test later, haha.) For customers like you, this is a crucial piece of technology because it demonstrates the way light interacts with your diamond. It’s much easier to see and understand a diamond’s beauty through this image than to listen to a scientific explanation, right? We can show you your diamond’s ASET image right at Jack Lewis, and you can even snap a picture of it to carry around with you or share on social media.

Additionally, The ASET  shows the “optical symmetry” of your diamond. For example, in the image above, the eight symmetrical arrows prove that the diamond was cut with a high degree of craftsmanship and artistry.

The simple fact remains that while what we do isn’t the most complicated job on the planet, it really does take a scientific approach and an educated eye to do all of the above. A life spent in the diamond business can teach the right grader, gemologist, or diamond buyer the skills they need to be able to make proper decisions and assign the right grades which determines the right price.

The average consumer looking to find just the right diamond for the love of their life does not have the time to become an expert during their brief shopping experience. They can Google, research, and look at hundreds of diamonds, but they will still need to seek out a properly credentialed and trustworthy diamond professional to help them find what’s right for them. That’s the real dilemma when you’re looking for a jeweler isn’t it….trust?

I once had a client at the diamond counter who told me that Jack Lewis Jewelers was the 15th jewelry store he had visited! He was so confused and so frustrated with the process that he was almost in tears. I can understand why. One jewelry store will tell you one thing, and then another will explain it another way, and on top of it, they are all trying to sell you whatever is in front of them. Just about all of them mean well and are honest, but it can be a lot to process.

I asked if I could give him some advice and he reluctantly said, “Sure.”  I said, “Just stop. Stop looking. Pick the place that makes the most sense with as little sales talk as possible. Then trust that person to walk you through the process with an education along the way.” I went on to say that I hoped that was me, but if not, he needed to find the person he could most relate to and trust.

I could tell when I gave him that advice that I had lifted a great weight off of his shoulders. The process can be overwhelming and the diamond grading scale can be a large part of why. I understand that retailers don’t always do a good job of explaining the process, so it is really important to find one who takes the time to do just that. I’ve found it’s the best way to establish a relationship with my clients—and dare I say it—a friendship. I’m happy to say that client did choose me! This occurred over 10 years ago and over the course of a few years, he even sent me several of his friends.

You can see we’ve taken this from an explanation about Cut Grade to the importance of establishing a relationship with someone you can trust. My journey to this destination was no accident. So let’s cut to the chase: at some point, buying a diamond becomes a leap of faith, and Cut is the most complicated part of the buying process as well as being the most essential characteristic in determining beauty. I believe it’s an understatement to say that it pays off to have an expert help you with that part. And at Jack Lewis, we’re ready to walk you through it.


I want to thank my friends at the American Gem Society (AGS) and AGS Laboratories for helping me with this blog. In particular, Jason Quick, who is the Laboratory Director and a mad genius who understands diamonds in ways I can only imagine. Jason and the team at AGS are on the forefront in the jewelry industry because consumer protection is at the very heart of everything they do.

Like the young man in my story, I hope you also choose Jack Lewis Jewelers, but we realize we can’t sell everyone a diamond. If you’ve ever wondered how you can find a jeweler you can trust, start with us if you can…but if not, AGS has you covered. Visit Find a Jeweler at www.americangemsociety.org/find-a-jeweler, type in your zip code and visit a great store. Every retail member of the American Gem Society adheres to a strict code of ethics that help them remain dedicated to the education of their clients.

Clarity Rarity: Crystal Blue Persuasion

Our AGS Laboratories’ gemologists love when they come across something as rare and beautiful as what they have dubbed a “clarity rarity.” Diamonds are always fascinating to examine and sometimes the incredible inclusions make our imaginations run wild! Check out the “rainbow trout” and the “smiley face!”

Here’s their latest finding. It’s a blue crystal in the table of a 2.23 ct diamond. It kind of looks like a sapphire ring embedded in the middle of the diamond. What do you think? Click on the images for a larger view.

Crown view at 25x magnification.
3 - 25x crown view

Crown view at 50x magnification.
2b - 50x crown view

To learn more about diamond grading, clarity, and AGS Laboratories, click here. To find a jeweler who carries AGS Laboratories Diamond Grading Reports, click here. AGS Laboratories is a nonprofit diamond grading lab created with a mission of consumer protection.

Ask your jeweler for an AGS Laboratories Diamond Grading Report. Accept no substitutes, and buy your diamond with confidence!

‘Tis the Season for Stackables, Studs, and Solitaires

s-blog-trio

The holidays are only a few days away, so if you’re still looking for something super special for the season, the American Gem Society (AGS) suggests stackables, studs, or solitaires. These pieces are always on trend and are regular go-to items in any fine jewelry wardrobe.

Below are some dazzling designs by our AGS members that are sure to inspire. If you need more ideas, you can always count on an AGS jeweler to help. Every year, our AGS members are required to continue their gemological education, staying up-to-date on changes and trends in the jewelry industry. Search for an AGS jeweler near you by clicking here.

Stackables

The beauty of a stackable bracelet or ring is that you can wear them individually, mix and match to change the look or wear them all together. So many options!

Studs

These days, when it comes to studs, the possibilities are endless! You could sport a solitaire diamond or gemstone by day, and then dress it up with an earring jacket by night.

Solitaires

Often a solitaire is presumed to be a round diamond, simply set as a ring or pendant. But today you’ll find these singular stones come in all shapes, sizes, and species—like corundum (ruby and sapphire) and quartz (amethyst and citrine).

Always keep in mind, when purchasing a diamond—whether it’s a loose stone or mounted—to ask your jeweler for an AGS Laboratories Diamond Grading Report. That way you can be confident that your diamond has been consistently and accurately graded by the only nonprofit diamond grading laboratory with the mission of consumer protection. Accept no substitutes. Happy shopping!

Out of the Vault: Clarity Rarities Continued

The gemologists at AGS Laboratories came across some more clarity rarities to share. If you missed the first two installments of this series, be sure to read Out of the Vault: Clarity Rarities and Out of the Vault: More Clarity Rarities.

This first fun finding was taken at 50x magnification of a crystal shaped like a turtle, and the “turtle’s” reflection. Can you see it? (Look closely, you’ll see the body, head, and arm).

turtle-104057377001_5

This next image was taken at 20x magnification and exhibits iridescence in a feather. Some of our gemologists see the head of a rainbow trout, with the opaque crystal representing the eye. What do you see?

rainbow-trout-104057043024_2

When it comes to diamond grading, there are five factors that affect how clarity is determined in a diamond, and how inclusions are considered: size, nature, number, location, and relief.

  • Size: Generally, the larger the inclusion, the greater the impact on the clarity grade. If the inclusions are large enough, the can also impact the durability of the stone.
  • Nature: Refers to the type of inclusion it is and its relative superficiality or depth.
  • Number: For the most part, the greater the number of clarity characteristics, the lower the clarity grade. However, inclusions are not always judged on the number, but on how readily they are visible.
  • Location: The position of the inclusion/blemish in the diamond.
  • Relief: The distinctness of the inclusion in contrast to the host diamond. The greater the relief, the greater the effect on the overall clarity grade.

To learn more about diamond grading, clarity, and AGS Laboratories, click here. To find a jeweler who carries AGS Laboratories Diamond Grading Reports, click here. AGS Laboratories is the only nonprofit diamond grading lab created with a mission of consumer protection.

Ask your jeweler for an AGS Laboratories Diamond Grading Report. Accept no substitutes, and buy your diamond with confidence!

Cut to the Chase

by John Carter, CGA, Jack Lewis Jewelers

So…I’m back! It’s been a while since I have regaled you with my gem nerd knowledge, so today I need to do a quick recap. We started off discussing color, then we went into clarity, followed up by my tales from Antwerp, Belgium. This time, we need to discuss the absolute most important aspect of any diamond: how it is cut! Because this is so important, we need to split it into a few parts just so I can hold your attention and give you the most important details.

My clarity blog ended by pointing out that the way a diamond sparkles generally has very little to do with its carat weight, its color, or its clarity. So what causes that dynamic little laser show you see in a perfectly cut diamond? I will do my best to explain.

For just over a hundred years, cutters have known how to properly proportion a diamond to maximize its sparkle. Yet without modern technology, they were forced to use nothing but mathematics to accurately decipher what angles would ensure the maximum beauty of a diamond.

Today, we can use computer programs and ray-tracing technologies to reinforce that those Belgian cutters from the previous century were almost spot-on with their equations. Think about how amazing that is! Using just mathematics, they were able to get the proportions of diamonds within fractions of a percentage point to their optimal standards. (And you never believed your teachers when they insisted math was useful.)

ray-tracing-pic-ags-credit

Over the years, I’ve had thousands of interactions with clients at our diamond counter, and while everyone is looking for something a little different, the constants that every buyer wants are the same: they want their diamond to be as big and as sparkly as possible for as little money as possible. Simple enough, but most people go about this process the wrong way (initially, at least). So it’s my job to help them see things from the proper angles (diamond cutting pun intended).

After some initial Internet research, the average diamond consumer becomes fixated on color and clarity and starts to focus most of their attention on those categories. This isn’t incorrect so much as it’s just incomplete, because it’s a little misguided to value those areas over the cut grade of the diamonds you are shopping.

Color and Clarity are important. They have to be since they’re based on rarity and because they affect the price so much. But here’s the truth that almost no diamond seller will tell you… Ready for this bombshell? Here it is: once you put that diamond on your finger, absolutely nobody will ever walk up to you and say, “Wow! That’s a really pretty 1.01ct G color VS2 clarity diamond!” Ridiculous right? Know why? Because unless the color and clarity are terrible, nobody notices those (not even your jeweler). What you, your friends, your family, and everyone else does notice about a diamond is its size and how much it sparkles. And what I’m telling you is that color and clarity have almost no influence on how much a diamond sparkles (again, unless they are lousy).

diamond-pic-ags-credit

So that brings us to the cut grade and the proportions of a diamond which, from an educational perspective, have always been the most difficult to explain because, frankly, there are so many numbers to focus on that it can be hard to know which ones to single out. Some people try. They look at the table percentage or the depth percentage and assume if they are in line, then the rest must be as well. But this is not always the case.

For generations, the diamond industry has known that the cut grade is the most important factor in describing a diamond’s beauty, but they struggled for decades to explain why. In fact, this is such a complicated topic that universally-accepted grading standards for Cut didn’t make it into the marketplace until nearly 40 years after the accepted nomenclature for color and clarity were instituted.

It was in 2005 that the AGS Laboratories from American Gem Society (AGS) became the first diamond grading laboratory to bring clear standards to an otherwise fuzzy conversation. They accomplished this by basing their cut grading on both 3-dimensional modeling and on the actual appearance of the diamond. While other laboratories have since followed suit with systems of their own, I have always been a believer that the AGS system is the most thorough and reliable.

Out of the Vault: More Clarity Rarities

The gemologists at AGS Laboratories often come across diamonds that display some very unusual clarity characteristics. These rarities confirm Mother Nature’s ability to be both humorous and creative, as seen in our first “Out of the Vault: Clarity Rarities” blog.

The next set of these clarity curiosities displays colorful crystal inclusions, which are internal characteristics of a diamond. These inclusions usually form in a diamond as a result of the tremendous heat and pressure deep within the earth where they form. Inclusions can also be created by a diamond’s violent journey to the earth’s surface caused by volcanic eruptions.

Since many inclusions and blemishes are very small, and can be difficult to see with the naked eye, they are graded at 10x magnification. Grading at 10x is an industry standard to determine the final clarity grade of the diamond.

This photo was taken at 40x magnification of a green crystal inclusion within the diamond.

green-crystal-40x

Next is a purple crystal inclusion, taken at 20x magnification.

purple-crystal-20x

Diamond graders plot the inclusions they see in the diamond on a diagram which is included on AGS diamond grading reports. See how AGS Laboratories’ diamond graders plot diamonds.

To learn more about diamond grading, clarity, and AGS Laboratories, click here. To find a jeweler who carries AGS Laboratories Diamond Grading Reports, click here. AGS Laboratories is the only nonprofit diamond grading lab created with a mission of consumer protection.

Ask your jeweler for an AGS Laboratories Diamond Grading Report. Accept no substitutes, and buy your diamond with confidence!

The Six Steps Towards a Secure AGS Laboratories Diamond Grading Report

Platinum2016SAMPLEBeing a nonprofit organization that is dedicated to the mission of consumer protection, AGS Laboratories takes the security of their diamond grading reports very seriously.

If you have an AGS Laboratories diamond grading report, take a close look at it. Have you ever noticed any of the security features? Some are apparent and some are hidden. We feel you should know about the six security steps AGS Laboratories has taken to ensure the authenticity and security of your diamond grading report.

#1 – Paper

Just like U.S. currency, the paper used to create your diamond grading report is tracked and signed in and out. When documents need to be printed, the paper is taken from its secure location, counted, and then signed out. Once printed, it’s counted again. The amount of paper that was originally signed out must match the amount that was printed.

If a document is misprinted, it will be securely discarded. This action must be added to the report, that way the destroyed document isn’t recorded as missing.

#2 – Hologram

hologramEach document contains a special hologram unique to AGS Laboratories. Like the paper, these holograms are counted, signed in and signed out. It also contains its own security feature: if you try to peel it off, it becomes illegible and cannot be reapplied.

 

#3 – Barcode

Each document has its own unique barcode, which is just one more way the security of your document is reinforced.

barcode

#4 – QR Code

QR-codeAt the top of each document appears a Quick Response (QR) code, which can be scanned with any QR app found on a smartphone or tablet. The QR code ties in with the AGS number and barcode found on each document. If the algorithm within the QR code verifies that both numbers match in our database, it will connect to the report verification page on the AGS.org and agslab.com websites.

AGS Laboratories is the first to have both a barcode and a QR code on laboratory documents.

#5 – Unifraction Embossing

unifractionOn the reverse side of the document, you will see something that looks like a hologram but is, in fact, a proprietary security mark woven into the paper. Examples of unifraction embossing can be found on some foreign currency.

#6 – Lamination

The lamination on your document keeps it looking like new. It protects against damage from liquids, the transfer of oils from our skin, paper-loving vermin, and the general wear and tear of time. It’s also bonded to the document; if one attempts to peel it off, it will destroy the document, removing ink in the process.

Ensuring Your Protection

So, there you have it: the six security features on your AGS Laboratories diamond grading report. These six features can only be found on full and half page documents. Go ahead and count them. Scan the QR code. Be confident you have an authentic and secure document in your hands.

We know shopping for a diamond or diamond jewelry is a big investment, and at times can be intimidating. Always ask for an AGS Laboratories Diamond Grading Report to help you make an informed purchase. And, be sure to shop with an American Gem Society credentialed jeweler. They will explain your desired diamond’s AGS Laboratories Diamond Grading Report, as well as tell you about the qualities and characteristics that make your diamond unique.

To begin your search for an AGS credentialed jeweler, visit Find a Jeweler. Get social with AGS Laboratories on Facebook (www.facebook.com/agslabs) and Twitter (@AGSLabs).